53 lines
2.0 KiB
Markdown
53 lines
2.0 KiB
Markdown
# node-red-contrib-xiaomi-devices
|
|
|
|
This module contains the following nodes to provide easy integration of the Xiaomi devices into node-red.
|
|
|
|
The following devices are currently supported:
|
|
|
|
* Temperature/humidity sensor
|
|
* Magnet switch
|
|
* Button switch
|
|
* Motion sensor
|
|
* Power plug (zigbee)
|
|
|
|
## Preperation
|
|
To receive the gateway json messages on your network you need to enable the developer mode, aka LAN mode in the gateway.
|
|
|
|
A UDP input node is needed to receive the json messages. An UDP output node to send command's to the gateway.
|
|
|
|
|
|
## Install
|
|
|
|
```
|
|
cd ~\.node-red
|
|
npm install node-red-contrib-xiaomi-devices
|
|
```
|
|
|
|
## Usage
|
|
|
|
From the Xiaomi configurator screen add your different devices by selecting the type of device and a readable description. The readable discription is used on the different edit screen of the nodes to easily select the device you associate to the node.
|
|
|
|
Tip: use the configurator from the side-panel (hamburger menu, configuration nodes) to manage your devices. Node-red doesn't update underlying edit screens if the configuration panel is opened / closed from the edit node screen. (If you do, you need to first close the edit node screen and reopen it by double-clicking the node you want to edit the properties for.)
|
|
|
|
To receive/send json UDP messages from/to the gateway you need to enable the local LAN mode on the gateway. To receive the json UDP messages in node-red you need to add an udp-node with the correct configuration:
|
|
|
|
```
|
|
Listen for: multicast messages
|
|
Group: 224.0.0.50
|
|
Local ip: <empty>
|
|
On port: 9898 ipv4
|
|
Output: String
|
|
```
|
|
|
|
If you want to sent messages to the gateway you need to add an UDP sender, here an example configuration:
|
|
|
|
```
|
|
Send a: UDP message to port: 9898
|
|
Address: <ip_of_your_gateway> ipv4
|
|
```
|
|
This configuration worked for me however I have seen people using different configuration to make UDP work.
|
|
|
|
Here an example of how to use the different nodes.
|
|
|
|
|